How Much Does Shingle Roof Installation Cost

Whether you plan to renovate your home to increase its value or it has suffered significant damage from a natural disaster, you may need roof installation services.

However, before deciding and hiring the right roofing contractors to install a new structure, you should consider a few things. One of the most important is the budget.

How much does a shingle roof installation cost? How much money do you need to start this roofing project? You can find that information here!

How Do You Shingle a Roof Step by Step?

If you want to determine how much a shingle roof installation costs, the first thing to consider is installing a new structure.

The project’s complexity is one-factor experts consider in deciding how much to charge for this service. Installing shingles requires knowledge and experience. Overall, this is what contracts should do:

Step 1: Pick the Right Roofing Materials

If you want to replace your existing roof or must install a new one because it is damaged, one of the first things you should do is pick the right materials.

These are the most common:

• Asphalt shingles
• Wood shakes or shingles
• Architectural shingles
• Clay tiles
• Composite or synthetic shingle roof
• Slate roof

An experienced roofing professional can help you determine if an asphalt shingle roof is for you or if there is a better alternative for your property.

Step 2: Take Safety Precautions

Installing a new roof can pose some risks, especially if unprepared. That’s why contractors must protect themselves and their property from damage.

Common Safety Precautions

• Clear the work area of ​​debris or any obstacle that could become a tripping hazard
• Check the weather forecast to be sure the weather conditions are favorable to start the roofing work (Ideally, professionals should work on sunny, dry, and warm days)
• Wear the right clothes, as installing a roof is a highly physical labor, and heavy clothing could make the work more difficult (Recommended clothing includes sturdy jeans and shirts with full range shoulder motion)
• Wear footwear with thick and resistant soles to avoid being injured by stray roofing nails on the ground
• Don’t forget the ladders, and make sure they’re in good condition before you start working on the roof
• Use the right safety equipment to stay protected, including helmets, gloves, or glasses

Step 3: Prepare the Roof

Once they have the proper safety equipment, experts must prepare the roof. In this step, it is essential to do the following:

• Remove debris and clean the roof’s surface, getting rid of large branches or twigs
• Carefully remove the old shingles using a garden fork or roof shingle removing tool, starting from the roof’s peak until each slope is clear

This process can take time and is often demanding, especially if the roof’s existing shingles are severely damaged.

Step 4: Install Flashing

The next step is to install the flashing, which are the metal strips that often cover a roof’s seams and joints between the structure’s protrusions.

Overall, it is only necessary to replace the flashing if it is not in good condition and there is corrosion, lifting, curling, or other damage.

Step 5: Install New Shingles

After the flashing, it’s time to install the new shingles.

When experts use the proper methods and perform this process correctly, the new roof is better, more durable, and more functional.

However, shingle roof installation techniques can vary depending on the roofing material.

Installing Asphalt Shingles or Architectural shingles

Most asphalt shingle manufacturers explain the best way to secure roof shingles. Therefore, before nailing the first shingle, it is crucial to check those instructions.

However, most of the time, these are the steps that experts should follow to install an asphalt shingle roof:

• Lay out shingle courses
• Make sure roofing nails hold the top edge of the roofing course below
• Repeat that step, lining shingles up against the next, and nail each shingle
• Cut the last shingle on each row to an appropriate size, repeating the process until reaching the ridge
• Bend the asphalt shingle over the ridge, making each side even, and nail it on each side
• Repeat that step until you reach the ridge’s far edge
• Cut the last ridge shingle to the necessary length, making sure that no part of the roof is exposed

Note

Each shingle must be secured with four or six nails, depending on the area’s weather conditions.

Installing Clay Tiles

Overall, installing a clay tile is similar to what experts should do to lay an asphalt shingle. After having the pattern, the tile’s edge should be nailed to the roof underlay.

After that, experts should spread mortar beneath the tile. This step is essential to give more support to the structure.

Installing Metal Panels

Metal panels can be trickier to install, as it is essential to secure the seams. Therefore, the roofing contractor must cut the metal before placing it on the roof.

As a second step, they must add sealing tape along the seam in the spot where the next panel must be slid into place.

After all the panels are installed, experts should secure them with metal roof fasteners.

Installing Wood Shakes and Shingles

If they must install wood shingles on a roof, contractors should check the roof decking to ensure it is in good condition and create a vent structure or sheathing to prevent moisture from damaging each piece.

When the structure is ready, they should lay out the wood shingles and nail them into it. Measuring the shingles’ placement is essential to get the best results.

Should I Install a Drip Edge and Water Shield?

Other elements that can influence the roof shingle installation cost are the accessories you must add to the structure.

These include felt paper, synthetic paper, a water shield, a drip edge, ridge vents, and caps.

Depending on the accessory you choose, it can protect the roof from damage. Most building codes across the US now require drip edges or other items. Consequently, the amount you must pay for the service may be higher.

How Do You Lay Roof Shingles If You’re a Beginner?

Laying out a shingle is the same for beginners and experts. Therefore, experts can be your best allies if you need to replace your roof or install a new one.

Can I Install Roofing Shingles Myself?

Essentially, yes, you can install a shingle roof yourself. However, it is not recommended.

Whether you need to install an asphalt shingle roof or clay tiles, experts have the knowledge and tools to handle the entire process and ensure you get the best results.

How Much Does It Cost to Install Roof Shingles?

As mentioned, the price to install an asphalt shingle roof or a structure made of any other material varies depending on the project’s complexity and other factors.

However, on average, the quote includes $5 to $6 per square foot of material and labor, equipment, and repairs costs. Many contractors also include cleanup fees.

These costs and fees usually cost around $6,280 and $7,964 for a shingle roof.

Final Thoughts

Do you want to know how much roof shingle installation costs to renovate or repair your property? Contact us!

At Water Damage and Roofing of Round Rock, we can provide you with all the information and assistance you need.

Based on the square footage, materials, and project characteristics, we’ll give you a fair quote to help you fix your roof or get the structure you want!

The post How Much Does Shingle Roof Installation Cost appeared first on Water Damage and Roofing of Round Rock.

Original post here: How Much Does Shingle Roof Installation Cost